When Data Recovery Becomes Impossible

April 11, 2018

Recovery - original 3

Data Recovery Can Sometimes Becomes Unfeasible And Unable To Realize:

If you have a hard drive that has crashed, the most important thing you can do is contact a data recovery professional immediately. Make sure you aren’t being charged evaluation fees if you have a standard IDE hard drive. Most companies only charge evaluation fees for complex RAID and network server drives.

It is important to do your homework, call and talk with the companies. When you find one that you feel comfortable with, give them a chance. Your hardest job, may be finding data recovery firms that actually have someone available to answer the phones. Ask questions and be sure to have the following information available: Size of the drive, Operating system (i.e. Windows 98, Windows XP, etc.), Situation of failure (what happened just before the drive stopped working), is the drive recognized by the computer or not.

Lost Data can be recovered:

Whether you own your own business or work for someone that does you’ll find that data protection is one of the smartest and safest approaches you can take to ensure the profitability and livelihood of your business. When dealing with data recovery and protection it is vital you remain calm and assess whether you are dealing with a hard drive or other issue. Fortunately no matter how dire the situation you can usually follow some easy steps to ensure maximum data recovery in the event of a computer crash.

Specialist data recovery services have many methods of recovering your data depending on your specific problem. However, all service providers do not have the most advanced knowledge or technology and can do more harm than good. Therefore, if your data is critical always seek a professional who will provide an evaluation before proceeding with the recovery. This will give you a listing of all recoverable files and summaries the reasons for the loss, together with a quote to fully recover your data.

Seek For Consultant Help:

But how do you go about finding a data recovery consultant? Firms’ services can be expensive and the risk of data loss can still be high if you do not research a firm beforehand. Contact a service provider and find a convenient, but reputable company to turn to. A consultant may cost a lot more than sending your drive out to a firm, but at least repair can be on your own turf. Weigh the costs and benefits and decide what is best – either way, your data is probably safer in an experts hand and not your own.

The Internet is also a great way to find out about a firms personnel and services. Often you can even read recommendations by other clients. But don’t just research a firm from afar; go ahead and make time to have a chat with employees so you can be assured of their qualifications.

The actual recovery may be conducted in a number of ways. If the media is physically damaged, or there are internal mechanical or electrical problems, the recovery may be completed in a laboratory or clean room. Depending on the fault, there are occasions when the recovery can be conducted direct from your location via modem or internet on a secure data link. Alternatively engineers can visit your site if security is an issue, or your data is critical. Regardless, reputable data recovery specialists should be able to work on any operating system or storage medium and be able to recover your data in as little as 24 hours if necessary. With all these means at their disposal, the specialist should be able to recover lost data in 80% of situations.


  • Orlando Alabarces April 11, 2018 at 9:52 pm

    Can't see the word cuz the letter r in white

  • Nik K April 11, 2018 at 9:52 pm

    The final product is 14 carats gold right ?

  • David Stanford April 11, 2018 at 9:52 pm

    It's a bit worrying to see someone swilling so much hydrochloric acid about with bare arms and ripped jeans. Is he wearing sandals too?

  • Art Trombley April 11, 2018 at 9:52 pm

    Thank you for this very informative video streetips, much appreciated. 🙂

  • Hayley Freemantle April 11, 2018 at 9:52 pm

    all that for that? good to watch your method behind the madness

  • levi griggs April 11, 2018 at 9:52 pm

    whether it was profitable or not, it sure was a darn interesting video, great job.

  • Charlie W April 11, 2018 at 9:52 pm

    It's good to have a hobby we all need one but that's some serious tweaker shit right there

  • Bryan Isensee April 11, 2018 at 9:52 pm

    That’s it, one freaking gram after all that work!!! definitely nothing I would be interested in, less I was just absolutely shit ass broke, lol.

  • Marcio Alexandre Alexandre April 11, 2018 at 9:52 pm

    se tá doido um trabalho danado fora o gasto com produtos químicos e gás para tirar uma merdinha dessas e melhor sair catando reciclagem nas ruas

  • Vasisth Nair April 11, 2018 at 9:52 pm

    this is a stupidest lengthy process for just a little bit of gold.

  • Mikee Vee April 11, 2018 at 9:52 pm

    Very cool, I've been thinking of doing this for a while. I have a supplier of used gold plated electrodes and I have a few old electronics that I need to strip down for the precious metals. My email info is on my about section, I'd love to learn how to do this properly and safely.

  • Darius Williamson April 11, 2018 at 9:52 pm

    Why the cutting tip and not a rose bud. Rose bud burns at a higher temp then cutting torch

  • holayamex April 11, 2018 at 9:52 pm

    does not use sulfamic acid to neutralize before precipitating?

  • TV Tech April 11, 2018 at 9:52 pm

    what bleach did you use

  • codbeastmode123 codbeastmode123 April 11, 2018 at 9:52 pm

    More .money wasted on the purchase..liquids and time then the money 1 g it's worth not a good deal but good video okay

  • andrew wayne April 11, 2018 at 9:52 pm

    Eric Cornwell
    No it's 31.1035 grams in an ounce of gold. Gold is measured in Troy Ounces.
    There are 14.583 Troy ounces in a pound.

    Otherwise, money losing operation at current gold prices.
    Unless one is collecting all the circuit boards, for free, then cutting the fingers off themselves & then doing all the jazz in the video. Then you might be ahead slightly on chemical cost. Problem being all your time spent doing all this. I value my time at $45/hr at the very least.
    Great video though on the educational side of how to recover & refine gold. Will be useful of the stock market crashes or someone sets off an EMP many many miles above the USA.

  • cheetoz plays Roblox April 11, 2018 at 9:52 pm

    Notice tho

  • cheetoz plays Roblox April 11, 2018 at 9:52 pm


  • Norman LaddleSchnitzel April 11, 2018 at 9:52 pm

    interesting video and a cool experiment, but it doesnt really seem like its a very efficient method considering the time and materials needed. stil cool though!

  • Buck Ackerman April 11, 2018 at 9:52 pm

    Great informative video. Just think of all the gold plated junk out there. Old plates and cups and silly coins you can find in garage sales.

  • thatchickxox1089 April 11, 2018 at 9:52 pm


  • Joe Paul April 11, 2018 at 9:52 pm

    If you had access to free scrap….it could profitable

  • Bertminator April 11, 2018 at 9:52 pm

    that's not even 1/2 an ounce. Last I heard gold was $1,723.00/oz. Canadian, so he's got himself about about a $570.00 piece of gold.

  • manny fresh April 11, 2018 at 9:52 pm


  • Onemillionmoney April 11, 2018 at 9:52 pm

    wasted more money on supply for $15.00 worth of gold! yes gold is about $40 a gram when you buy it but not when you sell it!

  • Black Sun April 11, 2018 at 9:52 pm

    Why didnt you just burn the plastic away?

  • Wilfred Michael April 11, 2018 at 9:52 pm

    Really interesting, I would like to work with you here in Tanzania. Please contact me through my email, wilfredmichael61@gmail.com

  • Jerry F April 11, 2018 at 9:52 pm

    32 $40 in chemicals. About 20-30 bucks wrapped up in beakers .then air pump. then ordering circuit boards. Then $500 brazing torch.. And a whole bunch of time.while breathing toxic chemicals and risking chemical burns All for $40 bucks of gold maybe, because it's not even refined yet? Hmm I believe I'd just hold on to that money. Use it to buy gold when the price is down and sell it when it's up…

  • Scott Ritter April 11, 2018 at 9:52 pm

    I know that you challenge yourself. But can you do a video where use reverse electroplating on the gold fingers instead of trying to separate them? Similar to your played golf scrap.

  • Gulf Charlie April 11, 2018 at 9:52 pm

    Thats cool 27 more times and you got oz of gold, good production

  • John Pellegrino April 11, 2018 at 9:52 pm

    PURE GENIOUS!! A MASTERMIND AT WORK AND A GREAT FLIP! WELL WORTH THE INVESTMENT. much respect too you………. I read comments on here on people saying its not worth the money and time ? anyone who knows !math plus how to hustle and flip ANYTHING they would clearly see the tools an product investment and the material investment equals a great profit return as a whole' oh yeah its fuckin worth it even at the price of gold being at a all time high or low your still not gonna loose but profit instead nicely with the continuous all day every day hustle

  • ThatSoto April 11, 2018 at 9:52 pm

    Muriatic acid….lol, most folks shouldn't be handling these types of chemicals.

  • Elver Morales April 11, 2018 at 9:52 pm

    My eyes just closed very long for 1 gram of gold that is ridiculous

  • antonis kyriakou April 11, 2018 at 9:52 pm


  • ray bee April 11, 2018 at 9:52 pm

    *********seems like a lot of work for one gram…… how much was it worth for all the trouble?? nice video though******

  • Cristie Brewer April 11, 2018 at 9:52 pm

    Thanks for the video, it was very interesting and informative. I enjoyed it.

  • St. Apollonius April 11, 2018 at 9:52 pm

    about thirty pounds stirling for 1g of gold……not at all worth the effort and the costs.

  • Harry Webb April 11, 2018 at 9:52 pm

    Very interesting but 1 gramme of gold for all that work and you need to deduct the cost of the chemicals. not to mention the damage to the environment when all them chemicals find their way into the food chain. I can't see the point!

  • mrebholz April 11, 2018 at 9:52 pm

    The 1k dislikes are the scammers that are offended by your myth bust. 💨

  • Saosaq Ii April 11, 2018 at 9:52 pm

    Can you actually make a profit from this? Looks like you wasted more money on fuel for melting the gold, time for dissolving the gold, money on buying chips and finger, and acids? Or maybe you do this as a side job maybe?

  • gilberjj April 11, 2018 at 9:52 pm

    This doesn’t seem like a profitable venture. I wish he would have broken down how much he paid for 500 grams of fingers, then he could begin to calculate a profit/loss. I doubt it’s viability even forgoing material cost, equipment, supplies and time…
    That’s a LOT of work for $43ish worth of gold.
    Very interesting though.

  • Durga Shrish April 11, 2018 at 9:52 pm


  • Peter Siebert April 11, 2018 at 9:52 pm

    I thought that was very interesting and could imagine that would be a nice experiment für the kids at school.  Someone here mentioned that value of the gold bead was around 45 Dollars. I think if you deduct the price of the original purchases, the chemicals, the equipment needed and the hours spent doing it, you are on a loser. I don't think I'll bother.

  • Jeffrey Edwards April 11, 2018 at 9:52 pm

    500 grams to get 1 gram

Leave a Reply

Your email address will not be published. Required fields are marked *