How To Use 7 Basic Steps To Perform A Windows Data Recovery

April 17, 2018

East Wing

In our computerized world, there are a lot of horror stories out in our world when it comes to retrieving this data. In lots of situations, when there is lost data because of hard drive issues, it is almost critical to not run the drive.

Are there many people using software to recover data?

Many people who have used software to recover the data and because it can be a long process with the program, more damage can occur. In order to prevent this, here are some steps on how to perform a windows data recovery.

What are the 7 steps? They are:

1) Shut down the computer, and then find another computer that is running Windows 2000 or XP. Then download your computer recovery software onto the second computer, and go back to the computer you were on and remove the hard drive from it.

But before that it is a good idea to make an image of your whole drive with a disk imaging software. Do these before you decide to start work on the drive.

There are chances your drive may not ever work on your computer again. The procedure that you are about to learn will help prevent you leaving being important data without knowing it. Inadequate software can be the cause of what is called “feather”damage to your drive. Then after that take the hard drive and install it on the second computer as a data drive.

2) Laptop computer hard drive can be connected to your desktop computer with an adapter. If you want to have cheap data recovery because your recovery software doesn’t work with USB, but you are capable of using IDE, you only need a 44 to 40 pin IDE adapter.

These is just affordable, it only cost you around ten to twenty dollars. It’s available at most leading stores that carry supplies for computers. Make it sure that your windows program does not use the “check disk” utility to repair the drive.

3) Use the data recovery program to run your windows data recovery on the second computer you are using. Immediately shut down your computer if you are only using one computer. With the second step of your windows data recovery, you are still going to remove the hard drive of this computer.

4) And then install a new drive, reinstall windows and use your recovery software on it, just take safety precautions, because many people used software to recover data but because, it takes you time to process the program, more damage can occur, just be careful with this.

When the drive becomes more damaged, it can make the recovery process almost impossible. The recovery software does serve its purposes when you can afford to bring your drive to a professional recovery service.

5) Then use your recovery software to recover the data to your new hard drive. But Make it sure that the windows “check disk” utility program does not try to repair the drive when it is booted.

6) Make sure that you recover your data completely, If you want your windows data recovery run smoothly as possible, make it sure that you protect your file.

7) In order to protect your file, once you have installed and downloaded the recovery program onto your computer, you can use it to search for files that you can’t find and recover them to another drive that is on your computer.

What are the items you need?

USB external drive, memory stick, and network-shared folder these are some items that you can use to store your files.

In conclusion, performing a windows data recovery is simple and easy to do provided you know how to do it. I believe with the right tools and practice you can perform any kind of windows data recovery with a breeze.

Therefore, Eddy has started a information guide on how to help any level of computer users to manage their data recovery process with ease and also recommend some tips and techniques in data recovery.


  • VidShoe April 17, 2018 at 10:35 pm

    I just finished uploading the second part of the video. You can watch it here:

  • Aznhooda April 17, 2018 at 10:35 pm

    Hopefully this helps u guys… i have a custom pc if u did any oc or anyrhing go to bios, then reset settings to default

  • Phoumint April 17, 2018 at 10:35 pm

    I have a flash with windows 8

  • Cosmic Star5911 April 17, 2018 at 10:35 pm

    How do get the Windows recovery tool on a usb drive?

  • jay singh April 17, 2018 at 10:35 pm

    How you made this pendrive

  • Сергей Зольников April 17, 2018 at 10:35 pm

    Памагите я русский у меня тажа проблема

  • Kent Avraham April 17, 2018 at 10:35 pm

    If Windows takes time to start or there is something not normal, it is just because of Microsoft Windows problem. If you are facing these type of issues

  • RyanRBLX April 17, 2018 at 10:35 pm

    i has usb but its on but not detecting it on boot manager ugghh any i did revive on my desktop to re install boot windows and now usb stick not noticeable on my laptop

  • PhelanPKell April 17, 2018 at 10:35 pm

    Hey, so it helps to know the root cause of a problem, which this video didn't get to.

    I was assisting a Gamer buddy with a new computer build over Discord (I know, pretty awesome), when he got this error.
    Based on the timing, it occurred during the first reboot, and I had not seen it before.
    I found this video referencing a "fix", which instead amounts to "reinstall windows".
    Fortunately, experience coupled with knowledge gave me what I needed to actually fix the problem, which was that the other two drives in the system still had boot position info on them. This can be fixed by disabling these devices in the boot up sequence, so that the system won't try to read their MBR/GPT info.

  • Eny's _ April 17, 2018 at 10:35 pm

    You saved meeeeeeeeeee thank youuuu <3

  • Kypd Nfzbr April 17, 2018 at 10:35 pm

    Go to google search Vanskeys to get 100% genuine product key.

  • kral oyuncu April 17, 2018 at 10:35 pm

    abi ben yapamadım yardım edermısın

  • Tadeo 131 April 17, 2018 at 10:35 pm

    Alguien que es bilingüe entendio? Ese es mi error y el unico que encuentro en youtube alguien me puede decir los pasos?

  • Bharti hhh April 17, 2018 at 10:35 pm


  • Lilauyc Douglaselx April 17, 2018 at 10:35 pm

    Guys can go Vanskeys(doc)com to get 100% genuine windows 10 product key.

  • Vj Divan April 17, 2018 at 10:35 pm

    How to solve the problem……
    Please help…..bro👇


    Your PC/Device needs to be repaired

    Acomponent of the operating system has expired

    File: Windowsystem32 winload.exe
    Error code: 0c0000605

    You'l need to use recovery tools.
    If you don't have a installation media (like a disk or USB devicece) contact your pc admistration or PC Device PC/ manufacturer.

    Press Enter to try again
    Press f9 for startup setting

  • idk someone1 April 17, 2018 at 10:35 pm

    But dude we're do i Find a Windows 10 USB stick

  • JOKER SMILE April 17, 2018 at 10:35 pm

    Slm usta ya benim bilgisayar aynı hatayı verdi tek cözüm format mı başka yolu yokmu

  • Vlad April 17, 2018 at 10:35 pm

    Hey VidShoe if you are reading this you're a legend

  • Gaming Always April 17, 2018 at 10:35 pm

    Komen yg tolong cm haram

  • Gaming Always April 17, 2018 at 10:35 pm

    Hg pakai acer…aq asus…boleh dk? Babi butuh

  • Özgür Oynuyor April 17, 2018 at 10:35 pm

    türkmüsün 😂

  • Muhammet Erçin April 17, 2018 at 10:35 pm

    Anlatan yabancı yazılım türkçe vay amk

  • jennleigh neniel April 17, 2018 at 10:35 pm

    anong laman ng usb ??

  • angelica rincón April 17, 2018 at 10:35 pm

    compañero cuando vaya agrabar por favor tenga cuidado con el audio, es muy feo ese ruido que genera tu celular por tener tan alta ganancia el icrofono, NO MOVERLO TANTO

  • NEO CURIOSO April 17, 2018 at 10:35 pm

    hello I wanted to ask if the files are lost because I do not have support from them … I would appreciate the response thanks

  • Nayely Rodz April 17, 2018 at 10:35 pm

    I dont have a usb!!!!😭😭

  • Ludovina Chinchay Quispe April 17, 2018 at 10:35 pm

    Y porque sucede

Leave a Reply

Your email address will not be published. Required fields are marked *