Data Recovery Do’s and Dont’s

June 11, 2018

Recovery

Here I have tried to provide out some Do’s and Don’ts which must be followed when computer failure occurs. Caution should also be taken while dealing with hard drive failure or other type of computer problems. Never ever try to react in a panic as this will only cause or make the problem even worse.

Do’s

1. Always make it in a habit to backup your data frequently.

2. If you hear any awkward sound or smell any thing then always shut down your system and gives it a rest. Never try to keep working and making the situation even worse.

3. While repairing or opening your cabinet always try to discharge you body with any static charge stored on your body. Always ground yourself before having to open the cabinet.

4. Always try to install an extra fan so as to make the proper flow of air so as to make it free from excessive heating.

Don’ts

1. Never try to think that the data recovery solution will recover almost whole of your data. And you use our system in the worst conditions. Everything is having limitations and this also has the same.

2. Never ever try to recover your data with commonly available software or freeware as this will make the recovery even more badly. Always go for the reliable source of data recovery solution.

3. Do not subject the drive to extreme temperatures changes both hot and cold. As both this temperature in extreme case will harm you data stored on the Hard Drive.

4. Never try to remove the protective covering of the Hard Drive in order to repair the disk. Always consult for the proper Technician to do so.

The above mentioned Do’s and Don’ts are the most basic things which definitely must be taken into account so as to have the efficient recovery of the data. The Hard Drive of your system is he very important part as it stores most of your valuable data both offline and online so the above mentioned must be followed so as to make yourself free from any situation of data loss or disk crash up.

You should take a look here The Laptop Support Community if you need more information about laptop and data recovery.

44 Comments

  • Daniel Bogdan June 11, 2018 at 6:14 pm

    sir, this is corect operation ? https://www.youtube.com/watch?v=Xhz0sgfYD8M

  • Cannagorilla Canna June 11, 2018 at 6:14 pm

    It will be above 85% concentration so you won't need as much

  • Cannagorilla Canna June 11, 2018 at 6:14 pm

    Invest in a glass distillation set or get a 1000ml retort and distill your own HNO3. KNO3 stump remover + H2SO4 drain cleaner and you will have a great supply of nitric acid.

  • A.Z.B.C. June 11, 2018 at 6:14 pm

    Keep rocken sreetips, another great video!
    Rick in Pantano, AZ. yes the ghost town

  • Terry Foster June 11, 2018 at 6:14 pm

    How do you get the empurities out of jewlry, that are not totally  gold?

  • Booba Lacrim June 11, 2018 at 6:14 pm

    😂😂😂😂😂😂😲1gram

  • Rajesh Prajapati June 11, 2018 at 6:14 pm

    Reason why I hate chemistry 😂😂

  • Anis Ahemad June 11, 2018 at 6:14 pm

    Hi sir how will the gold polish be done by recover the senate, please sir upload the video please

  • Jose GodSlave June 11, 2018 at 6:14 pm

    Sir i am just a beginner. I tried four times to recover gold by AR process but i got nothing. But your process give clear knowledge to me. I will try your process to my gold plated pins high graded. But i have little one doubt. Why you didnt incenerated the pins before going for AR? Please give your watsapp for further clarification.. Thanks in advance.

  • Eko Zhu June 11, 2018 at 6:14 pm

    fake!! why in the endiing you took the another people video content absolutely same with theyr content

  • Info Inside June 11, 2018 at 6:14 pm

    well done!! Very nice video for knowledge….Thanks Bro..

  • aurelio murillo June 11, 2018 at 6:14 pm

    how much did all those chemicals cost

  • A S studio At if June 11, 2018 at 6:14 pm

    Everytime you have a little amount of gold waste of time

  • Adam Jubinville June 11, 2018 at 6:14 pm

    Gold crack

  • kwxj61b June 11, 2018 at 6:14 pm

    Thanks!

  • Brian Binesh June 11, 2018 at 6:14 pm

    What about the amount of base metals and their value?

  • Mike Simon June 11, 2018 at 6:14 pm

    I'd rather take that s*** out of a mind or do like gold rush all those chemicals you got to be crazy the s*** is highly bad for you

  • Spawn Vader June 11, 2018 at 6:14 pm

    respect bro I'm not going to do all that for 7.4 grams of gold , it feels it it's was me doing and I have a headache

  • Jose Luis Sanchez June 11, 2018 at 6:14 pm

    Hi sreetips, please what should I do or what method should I use to separate the gold from the white paste or residue that is formed when processing with nitric acid? It is impossible to filter it. Thank you.

  • Mivek Ener June 11, 2018 at 6:14 pm

    Yeah you was right ! You was way way off.

  • Marcel Meekis June 11, 2018 at 6:14 pm

    Damn man thot I was gonna see a ingot Fo sho

  • Narayan gharti June 11, 2018 at 6:14 pm

    instead of doing all this. go and buy gold is easy

  • Don House June 11, 2018 at 6:14 pm

    very cool bro thanks for the education one quick question how would a regular person like me get a hold of nitric acid like that?

  • MC ANTONIO June 11, 2018 at 6:14 pm

    more nitric acid please

  • fren6363 June 11, 2018 at 6:14 pm

    Why did you separate the magnetic and non-magnetic pins at the beginning??

  • 15-sec-of Fame June 11, 2018 at 6:14 pm

    H2O2 will dissolve this green/grey material very quickly @9:01 🙂

  • Jalil Khan June 11, 2018 at 6:14 pm

    Plz completely guide me and the name of chemical and timing of the using of chemicals. Pls reply on my email addres and video too. Thank you

  • normn11 June 11, 2018 at 6:14 pm

    couldnt you just melt it from the begining? would all the different metals seperate? seems like using $50 in chemicals to get $25 in gold.

  • vimal koushik June 11, 2018 at 6:14 pm

    kon kon se chamikle lagte hai apna koi no ya social id batao

  • caydenTGM the golden minecart June 11, 2018 at 6:14 pm

    How do you recover the gold from magnetic pins? Other than a sulfuric acid cell if applicable? Thanks

  • Richard O'connor June 11, 2018 at 6:14 pm

    glad you did this to show the and the cost.

  • k June 11, 2018 at 6:14 pm

    Ok I have like 45-60 lbs of mil spec pins would it be worth it to sell them online? Or do this method? and how much should I be looking at for this raw if I do sell them online

  • Vladimir Ilich Ulionov June 11, 2018 at 6:14 pm

    Ok. Basic question here. What the hell is a "military-spec gold pin"? What are they used for, and where does one get them?

  • portugal suiça June 11, 2018 at 6:14 pm

    good

  • caydenTGM the golden minecart June 11, 2018 at 6:14 pm

    You obviously do this quite a bit and I imagine you profit from your efforts. I probably have watched just about every video you have made. My question is, where and how do you source your raw materials that you get the best yields and most profit from? I don't plan to do anything on a large scale but I would really like to be able to put a little gold, silver, platinum, and palladium (eventually, I have some material I want to recover pd from but not in the near future) I would really appreciate the info very much. Thanks for making all the vids and sharing your experience. Your band has potential and I liked the song. The band seems to be pretty tight and the flute is great. Adds a nice touch and provides a wider range of musical areas that can be touched on. I used to play locally several years ago and missed an opportunity that would have been fruitful to this day 25 years later,, and quite well known as well had I accepted the opportunity. Oh well, hindsight is 20/20 right. Good luck in all your endeavors.

  • Joe Chang June 11, 2018 at 6:14 pm

    huge

  • Respectons notre Planète June 11, 2018 at 6:14 pm

    Tout cela pour 1.2g d'or, tu as dépenser plus en acide que la somme récolté pour cette minuscule pépite !!!
    All this to 1.2g gold, you spend more acid than the sum collected for this tiny nugget !!!

  • Mohd Khairulddin June 11, 2018 at 6:14 pm

    hi boss..can i buy from you sulfamic acid..i'm from malaysia.

  • Mystery June 11, 2018 at 6:14 pm

    What is the minimum concentration of the concentrated nitric acid?

  • Pitbull June 11, 2018 at 6:14 pm

    That's why the gold it's so expensive

  • Ocean Driver June 11, 2018 at 6:14 pm

    tnx for video, i dont know why my aqua regia solution stay green even after percipating with smb , plz any solutions

  • Lisa Fan June 11, 2018 at 6:14 pm

    that orange gas looks cool

  • joe k June 11, 2018 at 6:14 pm

    Just to add a bit, to process 1000 grams will require about 5000ml of HNO3, that's just an approximation. I've done plenty of them. My chemical cost for recovery, about 25% of the yield value. To me that's to high, so now I use a stripping cell, it's far more cost effective. Investment was paid for with 2 lbs of pins. Pure profit now and I am still using the same solution.

  • bhearts77 June 11, 2018 at 6:14 pm

    theres no way you could ever pay for your nitric costs with this amount of gold produced. whats your secret?

Leave a Reply

Your email address will not be published. Required fields are marked *