Chrome Error – How Do I Fix Google Chrome Error?

November 1, 2018

Recovery

Has there been a kind of Chrome error in your Google Chrome web browser? That is not something unique happened to you. Over the time most Chrome users become victim to various browser related errors. Major irritants among there errors are the entire browser crash and the AW snap error.

In the first type of error there is a dreadful total crash of the browser. Most people can not even open the web browser. When they try to open it an error message appears which says, Whoa! Google Chrome Has Crashed. Restart Now. ' However, upon restarting nothing happens. One is left with recently installed settings and bookmarks about to be lost. There is, however, a mild instance of this error in which the browser does open but it can not perform well. Sometimes it either closes down or keep sending annoying error messages.

If you are facing the second type of error it is wise to back up all of your browser data and either synchronize it or save it in your computer hard disk. You can save the bookmarks in computer and later import these bookmarks in a newly installed web browser.

The second type or error is also irritating. In that error the web browser suddenly stops displaying the web pages. One has to reload the web pages many times to expect it to start working like normal. But in some intense cases this AW Snap error is not dealt upon refreshing the browser.

These two errors can be linked to the file association issues. The file association references are the important components of the registry database in Windows. The Windows registry is a very sensitive area and acts like computer brain as it stores information about software, hardware and the programs in the computer system.

If there occurs an error in the registry it can severely effect our computer. Systems can crash, freeze and hang due to the registry errors. Not to mention files do not open properly like Google Chrome error in our example.

Now the question is how to fix the Chrome error easily? You must try to identify the cause first of all. Then you will repair registry to fix this issue.

A registry repair scan, which has the power to fix file association errors, will help you find the solution for Google chrome error.

Recently I had suffered from it too. I conducted many surveys but nothing worked for me.

37 Comments

  • Damon Mueller November 1, 2018 at 7:49 pm

    What a trip. If I made this video it would be pretty much exactly the same. Even down to you trying to be quiet because of family in the house, your voice is even similar. Of the same fold. ZFS is awesome, thank you for helping me understand a very possible pitfall. That's exactly what I was looking for. Whatever you're doing — it must be pretty dope to need that much storage (and for you to be as freaked out as I would be, that was important data). To need THAT much storage you're obviously doing something more visual (or many important VPS). With my application I favor speed over space. Same thing but with smaller SSD's. A rebuild like that would be much faster. … I thought I noticed at the command line you were running Z1… Z2 would have doubled the rebuild time. But again, you obviously favor space over speed. Probably played into that choice originally. At the end of the day, it worked. Right. And the family slept the entire time while you stressed over work the computer was doing. I can relate brother. Sometimes we need to let our computers do what we told them to do…. it just sucks when you don't get any output.

  • trumanhw November 1, 2018 at 7:49 pm

    anyone here not a fan of LTO ?

  • trumanhw November 1, 2018 at 7:49 pm

    Honestly, PROPS to you for making yourself vulnerable to youtube critiques… in order to share with us your thought process — evoke the anxiety in those who don't yet backup data in a single data-set … when it wasn't a drill.

    Yes yes, I do data recovery… I like ZFS. And I'd still want to have a tape backup or sync'd server as stated below…. BUT, hindsight's 20/20, and who says you (or anyone) necessarily has the budget for the condom.

    So again, thanks' for sharing.

  • stevwillsable November 1, 2018 at 7:49 pm

    yeah that is why i don't like playing with ''experimental'' file systems

  • Gustavo Neves November 1, 2018 at 7:49 pm

    I was wondering about your log device.
    Seems to be a mirror of HDD and SSD?
    .. NVM , found answer here
    https://www.youtube.com/watch?v=d1Sgi3hQA4k
    2 SSDs

  • Gustavo Neves November 1, 2018 at 7:49 pm

    LUL > 2:24 > "module license 'CDDL' taints Kernel."
    WTH??
    ok, found it here, still funny though
    https://unix.stackexchange.com/questions/118116/linux-what-is-a-tainted-kernel

  • Makrand Sanap November 1, 2018 at 7:49 pm

    I bet 98% ppl name their zpool as tank 😁

    Nice video btw!!

  • Adam Messmann November 1, 2018 at 7:49 pm

    Minecraft/

  • Landis Reed November 1, 2018 at 7:49 pm

    so, using a controller that does not park the drives , not a good idea, eh

  • VinZ November 1, 2018 at 7:49 pm

    It is very interesting to see the steps you go through while troubleshooting your pool, even though you initially missed checking what was causing the disk activity at boot.
    It prompts me to enhance my observability know-how – thanks for that too!
    LOL for the Seconds_Behind_Master. Good old memories…
    I would love to see more videos like that on youtube. Thanks for sharing!

  • Michael Webb November 1, 2018 at 7:49 pm

    Time to start looking at HA now that you've identified how screwed you are with a server down

  • troyBORG November 1, 2018 at 7:49 pm

    So what is MariaDB used for?

  • Johannes Kingma November 1, 2018 at 7:49 pm

    You know what ZFS scrub does, don't you?

  • Johannes Kingma November 1, 2018 at 7:49 pm

    @4:08 System Volume Information? What did Windows do there?

  • Akim Sissaoui November 1, 2018 at 7:49 pm

    Just got to the 20'. And I love to see that you did what most of us often do: You've been IMPATIENT !!!! XD

    If you had waited the 1st time it rebooted, you would have been able to go sleep a lot faster 🙂 But hey… We are impatient by nature…

    Also, it's a shame there is no indiciation of what is happening. No progress indication, whatever. Perhaps a file similar to /proc/mdstat showing what is actually happening ?

  • Akim Sissaoui November 1, 2018 at 7:49 pm

    ZFS panicked then administrator panicked … And the morale is not much about ZFS resiliency (which seems amazing btw) but rather: Do frequent backups ! Bec
    ause hearing you, if ZFS was not able to fix, you would have been in serious and expensive trouble 😉

    Still, well done and tx for sharing. I work on SAN and NAS storage since a very long time, and I just start playing with ZFS at home.

  • Stoney_Eagle November 1, 2018 at 7:49 pm

    What have we learned 😂😂 Never proceed filling up your drives when the os responsible of putting it there is corrupted 🤔

  • Attie Grande November 1, 2018 at 7:49 pm

    Nice video, thanks for sharing! I know we're nearly two years on… but do you remember what you were using for logging / stats monitoring? Presumably syslog on a separate machine for the former…?

  • Crux161 November 1, 2018 at 7:49 pm

    the lesson for the future here is Off site backups, and backups of those backups. ZFS is a tricky mistress.

  • Leberkas Semmel November 1, 2018 at 7:49 pm

    ZFS is like the bigger, RAM hungrier, feature richer alternative to BTRFS.

    What BTRFS is on the Desktop, ZFS is on the Server.

  • pancakewizard November 1, 2018 at 7:49 pm

    are you saying tittybytes?

  • MrGeekGamer November 1, 2018 at 7:49 pm

    It it my ears or are you saying "tittybytes"?

  • Terrence M November 1, 2018 at 7:49 pm

    zfs is great but its not a substitute for a backup, in your case I would 1st run SpinRite on all the drives then run the scrub again let it run fully thru

  • alex racketeer November 1, 2018 at 7:49 pm

    i uses freeBSD + zfs for my NAS . so far no issue
    i found the zfs on freebsd much more stable than linux

  • Michael Bellerue November 1, 2018 at 7:49 pm

    An excellent video! Good on you for having thought of recording your dilemma as it was happening.

  • Justin Brown November 1, 2018 at 7:49 pm

    I had an evening like this after replacing a failed disk in a redundant pool. Fought for hours. Turns out, I just needed to Export/Import. I felt like an ass, but sleep deprivation will do that. 😉

  • expansiongames November 1, 2018 at 7:49 pm

    how do you use zfs du you use like freenas or just freebsd and manually configure it?

  • Bob Powell November 1, 2018 at 7:49 pm

    When ZFS was recovering, could you have checked for a running process? If so, what would have been looking for?

  • Gediminas Cibulskis November 1, 2018 at 7:49 pm

    zfs sucks as hell.. never use it!

  • Chris Moore November 1, 2018 at 7:49 pm

    The problem you are having here is the reason that I run two, fully identical, servers that are kept synchronized. The one time that my primary went down, I was able to manually switch over to the backup and everything was working again in a matter of minutes. Then I could work on getting the primary back up without everything being down.

  • Bengt J November 1, 2018 at 7:49 pm

    "Had I known….". Don't beat yourself up on this. You can never know everything thrown at you, but reading up and methodically thinking through every action you did resulted in recovery with no loss of data. Describing the situation and next step to the camera is almost like discussing the next step with a colleague who does not completely understand what you are doing, but it helps to reflect and focus. 🙂

  • Israel Santos November 1, 2018 at 7:49 pm

    Gotta love ZFS on Linux 😀

  • Fredda November 1, 2018 at 7:49 pm

    backups ftw! ppl never learn…

  • Redox Gaming November 1, 2018 at 7:49 pm

    Very interesting, even though I had no clue what you were talking about 99% of the time hahaha

  • George Ntavelis November 1, 2018 at 7:49 pm

    hi! quick question how I can possibly use zfs under Ubuntu server? is it stable? I read somewhere that only freebsd is 100% reliable

  • NachoCheese November 1, 2018 at 7:49 pm

    You're running your workstation from a ZVOL over IB? I've been seriously considering doing that. Details?

  • Terry Sterling November 1, 2018 at 7:49 pm

    like seriously, what do you do?

Leave a Reply

Your email address will not be published. Required fields are marked *