Booting Your Arnova 10 G2 Into Recovery Mode

March 31, 2018

recovery

Are you an owner of an Arnova 10 G2? If so, then you know that these 10 inch tablets are perfect for surfing the web but, with their stock Android OS they don’t have too much more to offer. Thankfully, some very talented people found ways to root the 10 G2 allowing us to make administrative modifications or permitting the replacement of the stock Android operating system. There are even methods to installing Google Play, previously known as Google Market, and this alone has made the 10 G2 worth owning. Adding Google Play has leveled the practicality playing field for this device. Although, it can’t quite compete with quad-core power monster tablets with their high definition screens, it’s still a great tablet for $130, if you are willing to root it.

Rooting has become an almost effortless task for most devices with the advent of 1 click style rooting software. For the users out there that stumble upon this article and don’t know what “rooting an Android device” means; let me tell you. Rooting is a process that gives you, the user, administrative privileges on an Android operating system powered device. This allows you to circumvent restricted features, in the 10 G2’s case, removing bloat ware (unwanted applications that typically cannot be removed) or changing your ROM (a data file that is a version of the whole Android operating system.)

The Process

Here are the steps to gaining recovery mode access to your Arnova 10 G2:

  1. Plug the power cable and USB cable into your Arnova 10 G2. You should plug the other end of the USB cable into the computer and the power into the wall socket.
  2. Stick a paperclip into the reset slot and hold the reset button down.
  3. Push and hold the Volume + key. So now you are depressing the reset button and the Volume + button.
  4. Wait 15 seconds and release the reset button, but still hold the Volume + key.
  5. Give the device a few moments to cycle on. The screen will remain black. This black screen is the only visual proof that the Arnova is in recovery mode. You can release the Volume + button.

That’s it! You can now add your drivers and run your recovery software so that you can install a custom ROM or even the stock ROM which is located at Arnova’s support page.

There are lots of places to find information on the rest of the process. I implore you to search for different ROM’s and test them out. Some are great and some are even greater. Find what works for you and most of all, best of luck!

4 Comments

  • Dr. Mark in Texas March 31, 2018 at 2:59 am

    Is this a conventional "snatch strap", with about 10% stretch?

    What about the newer "kinetic recovery ropes" like a Bubba Rope, that had about 30% attack and, IIRC, a I've inch diameter has a breaking.strength of 74,000 pounds?
    https://www.youtube.com/user/BubbaRope
    Thank you

  • phoenixgaming20 March 31, 2018 at 2:59 am

    thoughts on Soft Shackles?

  • wokbok43 March 31, 2018 at 2:59 am

    No tree was hurt during this demonstration. Can't say the same for a white mattress and some corrugated iron tho !!!!

  • bullthrush March 31, 2018 at 2:59 am

    Have a look at the "Snap Trap" by "Ditch Hitch", an even better way to control a broken snatch strap.

Leave a Reply

Your email address will not be published. Required fields are marked *